DB103S
Image shown is a representation only. Exact specifications should be obtained from the product data sheet.
- Category
- SMD Bridge Rectifier
- Datasheet
- DB10×S
Product Spectation
| Parameter | Symbol | Value |
|---|---|---|
| Maximum Recurrent Peak Reverse Voltage | VRRM | 200V |
| Maximum RMS Voltage | VRMS | 140V |
| Maximum DC blocking Voltage | VDC | 200V |
| Maximum Average Forward Rectified Current 3/8”lead length at Ta =55°C | If(av) | 1A |
| Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load | IFSM | 50A |
| Maximum Forward Voltage at rated Forward Current and 25°C | Vf | 1.1V |
| Maximum DC Reverse Current Ta =25℃ at rated DC blocking voltage Ta =125℃ | Ir | 10μA |
| Maximum DC Reverse Current Ta =25℃ at rated DC blocking voltage Ta =125℃ | Ir | 500μA |
| Typical Junction Capacitance | Cj | 25pF |
| Typical Thermal Resistance | Rth(ja) | 40°C/W |
| Maximum thermal resistance per leg | Rth(jc) | 10°C/W |
| Typical Thermal Resistance | Rth(jl) | 15°C/W |
| Operating Temperature Range | Tj | -55to+125 |
| Storage and Operation Junction Temperature | TSTG | -55to+150 |
| Storage and Operating Junction Temperature | TSTG, Tj | - |
Features
- For surface mount application
- Reliable low cost construction utilizing molded plastic
- Technique
- Surge overload rating:50 A peak
Mechanical Data
- Terminal
- Plated leads solderable perJ-STD-002
- Case
- UL-94 Class V-0 recognized Flame Retardant Epoxy
- Polarity
- Polarity symbol marked on body
- Mounting Position
- any
Notes
- [1]Measured at 1.0 MHz and applied voltage of 4.0 volt
- [2]Thermal Resistance from Junction to Ambient and to Lead Mounted on P.C.B. with 0.51″×0.51″(13mm×13mm) Copper Pads