FE6B
Image shown is a representation only. Exact specifications should be obtained from the product data sheet.
- Category
- General-Purpose Rectifier
- Datasheet
- FE6×
Product Spectation
| Parameter | Symbol | Value |
|---|---|---|
| Maximum Recurrent Peak Reverse Voltage | VRRM | 100V |
| Maximum RMS Voltage | VRMS | 70V |
| Maximum DC blocking Voltage | VDC | 100V |
| Maximum Average Forward Rectified Current 3/8”lead length at Ta=55℃ | IFAV | 6A |
| Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load | IFSM | 135A |
| Maximum Forward Voltage at rated Forward Current and 25℃ | VF | 0.975V |
| Maximum DC Reverse Current Ta =25℃ at rated DC blocking voltage Ta =100℃ | IR | 5μA |
| Maximum DC Reverse Current Ta =25℃ at rated DC blocking voltage Ta =100℃ | IR | 50μA |
| Maximum Reverse Recovery Time | TRR | 35ns |
| Typical Junction Capacitance | Cj | 100pF |
| Typical Thermal Resistance | Rth(ja) | 55°C/W |
| Typical Thermal Resistance | Rth(jl) | 18°C/W |
| Storage and Operating Junction Temperature | TSTG, Tj | -65to+175 |
| Maximum Average Forward Rectified Current 3/8”lead length at Ta =55°C | If(av) | - |
| Maximum Forward Voltage at rated Forward Current and 25°C | Vf | - |
| Maximum DC reverse current at Ta = 25°C rated DC blocking voltage per leg Ta = 125°C [Ta=25°C] | Ir | - |
| Maximum full load reverse current full cycle average at 55°C Ambient | Ir(av) | - |
| Typical Thermal Resistance | R(ja) | - |
Features
- High temperature metallurgically bonded construction
- Glass passivated cavity-free junction
- Superfast recovery time-for hige efficiency
- Low forward voltage, high current capability
- Hermetically sealed package
- Low leakage current
- High surge current capability
Mechanical Data
- Case
- G-4 sintered glass case
- Terminal
- Plated axial leads solderable per J-STD-002
- Polarity
- color band denotes cathode end
- Mounting Position
- any
Notes
- [1]Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A
- [2]Measured at 1.0MHz and applied reverse voltage of 4.0V
- [3]Thermal resistance from junction to lead at 0.375”(9.5mm) lead length with both leads attached to heatsinks
- [4]Thermal resistance from junction to ambient at 0.375”(9.5mm) lead length and mounted on P.C.B.