FESP08J
Image shown is a representation only. Exact specifications should be obtained from the product data sheet.
- Category
- Ultrafast Rectifier
- Datasheet
- FESP08J
Product Spectation
| Parameter | Symbol | Value |
|---|---|---|
| Maximum Recurrent Peak Reverse Voltage | VRRM | 600V |
| Maximum RMS Voltage | VRMS | 420V |
| Maximum DC blocking Voltage | VDC | 600V |
| Maximum Average Forward Rectified Current 3/8”lead length at Ta =55°C | If(av) | 8A |
| Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load | IFSM | 120A |
| Maximum Forward Voltage at rated Forward Current and 25°C | Vf | 1.5V |
| Maximum Reverse Recovery Time | TRR | 50ns |
| Typical thermal resistance junction to case | RθJc | 5.5°C/W |
| Maximum DC reverse current at Ta = 25°C rated DC blocking voltage per leg Ta = 125°C [Ta=25°C] | Ir | 5μA |
| Maximum DC reverse current at Ta = 25°C rated DC blocking voltage per leg Ta = 125°C [Ta=125°C] | Ir | 50μA |
| Storage and Operating Junction Temperature | TSTG, Tj | -55to+150 |
| Typical Junction Capacitance | Cj | - |
| Maximum DC Reverse Current Ta =25℃ at rated DC blocking voltage Ta =125℃ | Ir | - |
| Maximum DC Reverse Current Ta =25℃ at rated DC blocking voltage Ta =125℃ | Ir | - |
Features
- Plastic package has Underwriters Laboratories Flammability Classification 94V-0
- Ideally suited for use in very high frequency switching power supplies, inverters and as free wheeling diodes
- Ultra fast recovery time for high efficiency
- Excellent high temperature switching
- Glass passivated junction
- High voltage and high reliability
- High speed switching
- Low forward voltage
Mechanical Data
- Case
- JEDEC TO-220 molded plastic body over passivated chip
- Terminals
- Plated Insert leads, solderable per MIL-STD-750, Method 2026
- Polarity
- Color band denotes cathode end
- Mounting Position
- Any
Notes
- [1]Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A