GBU6D
Image shown is a representation only. Exact specifications should be obtained from the product data sheet.
- Category
- Bridge Rectifier
- Datasheet
- GBU6×
Product Spectation
| Parameter | Symbol | Value |
|---|---|---|
| Maximum Recurrent Peak Reverse Voltage | VRRM | 200V |
| Maximum RMS Voltage | VRMS | 140V |
| Maximum DC blocking Voltage | VDC | 200V |
| Maximum Average Forward Rectified Current 3/8”lead length at Ta =55°C | If(av) | 6A |
| Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load | IFSM | 175A |
| Maximum Forward Voltage at rated Forward Current and 25°C | Vf | 1V |
| Rating for fusing (t < 8.3ms) | I2t | 127A²·s |
| Maximum DC reverse current at Ta = 25°C rated DC blocking voltage per leg Ta = 125°C [Ta=25°C] | Ir | 5μA |
| Maximum DC reverse current at Ta = 25°C rated DC blocking voltage per leg Ta = 125°C [Ta=125°C] | Ir | 500μA |
| Typical Junction Capacitance | Cj | 211pF |
| Typical Thermal Resistance | Rth(ja) | 7.4°C/W |
| Maximum thermal resistance per leg | Rth(jc) | 2.2°C/W |
| Operating junction and storage temperature range | Tj, TSTG | -55to+150 |
Features
- Ideal for printed circuit board
- Glass passivated chip junction
- High case dielectric strength
- High surge current capability
- This series is UL listed under Recognized Component Index,
- file number E330278
Mechanical Data
- Terminal
- Plated leads solderable per J-STD-002
- Case
- UL-94 Class V-0 recognized Flame Retardant Epoxy
- Polarity
- Polarity symbol marked on body
- Mounting Position
- Thru hole for #6 screw
Notes
- [1]Unit case mounted on 2.6 x 1.4 x 0.06” thick (6.5 x3.5 x 0.15cm) Al. Plate heatsink
- [2]Recommended mounting position is to bolt down on heatsink with silicone thermal compound for maximum heat transfer with #6 screw