Logo

GL41M

Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

Category
General-Purpose Rectifier
Datasheet
GL41A-41M
Start Inquiry with GL41M

Product Spectation

ParameterSymbolValue
Maximum Recurrent Peak Reverse VoltageVRRM1000V
Maximum RMS VoltageVRMS700V
Maximum DC blocking VoltageVDC1000V
Maximum Average Forward Rectified Current 3/8”lead length at Ta =55°CIf(av)1A
Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated loadIFSM30A
Maximum Forward Voltage at rated Forward Current and 25°CVf1.1V
Maximum full load reverse current full cycle average at 55°C AmbientIr(av)30μA
Maximum DC Reverse Current Ta =25℃ at rated DC blocking voltage Ta =125℃Ir5μA
Maximum DC Reverse Current Ta =25℃ at rated DC blocking voltage Ta =125℃Ir50μA
Typical Junction CapacitanceCj8pF
Typical Thermal ResistanceR(ja)75
Operating and Storage Temperature RangeTST, Tj-65to+175
Maximum DC reverse current at Ta = 25°C rated DC blocking voltage per leg Ta = 125°C [Ta=25°C]Ir-
Storage and Operating Junction TemperatureTSTG, Tj-
Typical Thermal ResistanceR(ja)-

Features

  • High temperature metallurgi cally bonded construction
  • Sintered glass cavity-free junction
  • Case over-molded with UL-94 class V-0 flame
  • Retardant epoxy
  • Capability of meeting environmental standard of
  • High temperature soldering guaranteed
  • 450ºC/5sec/at terminal
  • Operate at Ta =55ºC with no thermal run away
  • Typical Ir<0.1µA
  • 1st band denotes type and polarity
  • 2cnd band denotes voltage type

Mechanical Data

Terminal
Plated axial leads solderable per MIL-STD 202E, method 208C
Polarity
Two bands indicates cathode (1st band denotes device type and 2nd band denotes voltage type)
Mounting Position
any

Notes

  • [1]Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc
  • [2]Thermal Resistance from Junction to Ambient 6.0mm2 copper pad to each terminal