GP30J-E
Image shown is a representation only. Exact specifications should be obtained from the product data sheet.
- Category
- General-Purpose Rectifier
- Datasheet
- RGP25A-RGP25M
Product Spectation
| Parameter | Symbol | Value |
|---|---|---|
| Maximum Recurrent Peak Reverse Voltage | VRRM | 600V |
| Maximum RMS Voltage | VRMS | 420V |
| Maximum DC blocking Voltage | VDC | 600V |
| Maximum Average Forward Rectified Current 3/8”lead length at Ta =55°C | If(av) | 3A |
| Peak Forward Surge Current 8.3ms Tj = 25℃ single half sine-wave Tj = 125℃ | IFSM | 125A |
| Peak forward surge current (t ≤1.0ms) | IFSM | 250A |
| Rating for fusing (t < 8.3ms) | I2t | 64A²·s |
| Maximum Forward Voltage at rated Forward Current and 25°C | Vf | 1.1V |
| Maximum full load reverse current full cycle average at 55°C Ambient | Ir(av) | 100μA |
| Maximum DC Reverse Current Ta =25℃ at rated DC blocking voltage Ta =125℃ | Ir | 5μA |
| Maximum DC Reverse Current Ta =25℃ at rated DC blocking voltage Ta =125℃ | Ir | 100μA |
| Typical Reverse Recovery Time | TRR | 3s |
| Typical Junction Capacitance | Cj | 40pF |
| Typical Thermal Resistance | Rth(ja) | 20°C/W |
| Maximum thermal resistance per leg | Rth(jc) | 15°C/W |
| Storage and Operating Junction Temperature | TSTG, Tj | -65to+175 |
| Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load | IFSM | - |
| Maximum DC reverse current at Ta = 25°C rated DC blocking voltage per leg Ta = 125°C [Ta=25°C] | Ir | - |
| Typical Thermal Resistance | R(ja) | - |
Features
- High temperature metallurgically bonded construction
- Sintered glass cavity free junction
- Capability of meeting environmental standard of MIL-S-19500
- High temperature soldering guaranteed
- /10sec/0.375”
- ℃
- lead length at 5 lbs tension
- Operate at Ta =55
- with no thermal run away
- ℃
- Typical Ir<0.1A
- Halogen Free
Mechanical Data
- Terminal
- Plated axial leads solderable per J-STD-002
- Case
- Molded with UL-94 Class V-0 recognized Halogen Free Epoxy
- Polarity
- color band denotes cathode
- Mounting Position
- any
Notes
- [1]Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A
- [2]Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc
- [3]Thermal Resistance from Junction to Ambient and from Junction to case at 3/8”lead length, P.C. Board Mounted