GSIB25M60
Image shown is a representation only. Exact specifications should be obtained from the product data sheet.
- Category
- Bridge Rectifier
- Datasheet
- GSIB25M60
Product Spectation
| Parameter | Symbol | Value |
|---|---|---|
| Maximum Recurrent Peak Reverse Voltage | VRRM | 600V |
| Maximum RMS Voltage | VRMS | 420V |
| Maximum DC blocking Voltage | VDC | 600V |
| Maximum average forward Tc = 100℃ Rectified output current at Ta = 25℃ | If(av) | 25A |
| Maximum average forward Tc = 100℃ Rectified output current at Ta = 25℃ | If(av) | 3.5A |
| Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load | IFSM | 350A |
| Maximum Forward Voltage at rated Forward Current and 25°C | Vf | 0.95V |
| Rating for fusing (t < 8.3ms) | I2t | 500A²·s |
| Maximum DC reverse current at Ta = 25°C rated DC blocking voltage per leg Ta = 125°C [Ta=25°C] | Ir | 10μA |
| Maximum DC reverse current at Ta = 25°C rated DC blocking voltage per leg Ta = 125°C [Ta=125°C] | Ir | 350μA |
| Typical Thermal Resistance | Rth(ja) | 22°C/W |
| Maximum thermal resistance per leg | Rth(jc) | 1°C/W |
| Operating junction and storage temperature range | Tj, TSTG | -55to+150 |
| Maximum Average Forward Rectified Current 3/8”lead length at Ta =55°C | If(av) | - |
Features
- Glass passivated chip junction
- Ideal for printed circuit board
- High surge current capability
- High case dielectric strength
- This series is UL listed under Recognized Component Index,
- file number E330278
Mechanical Data
- Terminal
- Plated leads solderable per J-STD-002
- Case
- UL-94 Class V-0 recognized Flame Retardant Epoxy
- Polarity
- Polarity symbol marked on body
- Mounting Position
- any
Notes
- [1]Unit case mounted on Al plate heatsink
- [2]Unit case mounted on P.C.B. without heatsink
- [3]Recommended mounting position is to bolt down on heatsink with silicone thermal compound for maximum heat transfer with #6 screw