Logo

GSIB410-47L

Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

Category
Bridge Rectifier
Datasheet
GSIB4×-47L
Start Inquiry with GSIB410-47L

Product Spectation

ParameterSymbolValue
Maximum Recurrent Peak Reverse VoltageVRRM100V
Maximum RMS VoltageVRMS70V
Maximum DC blocking VoltageVDC100V
Maximum average forward Tc = 100℃ Rectified output current at Ta = 25℃If(av)4A
Maximum average forward Tc = 100℃ Rectified output current at Ta = 25℃If(av)2.3A
Peak forward surge current single sine-wave superimposed on rated load (JEDEC Method)IFSM130A
Peak forward surge current (t ≤1.0ms)IFSM260A
Peak forward surge current (t ≤1.0ms) Tj = 25℃ Tj = 125℃IFSM230A
Maximum Forward Voltage at rated Forward Current and 25°CVf0.95V
Rating for fusing (t < 8.3ms)I2t60A²·s
Maximum DC reverse current at Ta = 25°C rated DC blocking voltage per leg Ta = 125°C [Ta=25°C]Ir10μA
Maximum DC reverse current at Ta = 25°C rated DC blocking voltage per leg Ta = 125°C [Ta=125°C]Ir250μA
Typical Thermal ResistanceRth(ja)26°C/W
Maximum thermal resistance per legRth(jc)5°C/W
Operating junction and storage temperature rangeTj, TSTG-55to+150
Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated loadIFSM-
Maximum Average Forward Rectified Current 3/8”lead length at Ta =55°CIf(av)-

Features

  • Glass passivated chip junction
  • Ideal for printed circuit board
  • High surge current capability
  • High case dielectric strength

Mechanical Data

Terminal
Plated leads solderable per J-STD-002
Case
UL-94 Class V-0 recognized Flame Retardant Epoxy
Polarity
Polarity symbol marked on body
Mounting Position
any

Notes

  • [1]Unit case mounted onAl plate heatsink
  • [2]Unit case mounted on P.C.B. with 0.5 x 0.5” (12 x 12mm) copper peads and 0.375”(9.5mm) lead length
  • [3]Recommended mounting position is to bolt down on heatsink with silicone thermal compound for maximum heat transfer with #6 screw