KBP08G
Image shown is a representation only. Exact specifications should be obtained from the product data sheet.
- Category
- Bridge Rectifier
- Datasheet
- KBP0×G
Product Spectation
| Parameter | Symbol | Value |
|---|---|---|
| Maximum Recurrent Peak Reverse Voltage | VRRM | 800V |
| Maximum RMS Voltage | VRMS | 560V |
| Maximum DC blocking Voltage | VDC | 800V |
| Maximum Average Forward Rectified Current 3/8”lead length at Ta =55°C | If(av) | 1.5A |
| Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load | IFSM | 50A |
| Maximum Forward Voltage at rated Forward Current and 25°C | Vf | 1.1V |
| Rating for fusing (t < 8.3ms) | I2t | 10A²·s |
| Maximum DC reverse current at Ta = 25°C rated DC blocking voltage per leg Ta = 125°C [Ta=25°C] | Ir | 5μA |
| Maximum DC reverse current at Ta = 25°C rated DC blocking voltage per leg Ta = 125°C [Ta=125°C] | Ir | 500μA |
| Typical Thermal Resistance | Rth(ja) | 25°C/W |
| Typical Thermal Resistance | Rth(jl) | 8°C/W |
| Maximum thermal resistance per leg | Rth(jc) | 10°C/W |
| Typical Junction Capacitance | Cj | 15pF |
| Operating junction and storage temperature range | Tj, TSTG | -55to+150 |
Features
- Glass passivated chip junction
- High case dielectric strength
- High surge current capability
- Ideal for printed circuit board
Mechanical Data
- Terminal
- Plated leads solderable perJ-STD-002
- Case
- UL-94 Class V-0 recognized Flame Retardant Epoxy
- Polarity
- Polarity symbol marked on body
- Mounting Position
- any
Notes
- [1]Thermal Resistance from Junction to Ambient and from Junction to Lead Mounted on P.C.B. with 0.4″×0.4″(10×10mm)copper pads
- [2]Thermal Resistance from Junction to Case Mounted on heatsink