Logo

LLD06-E-41C

Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

Category
SMD Bridge Rectifier
Datasheet
LLD06-E-41C
Start Inquiry with LLD06-E-41C

Product Spectation

ParameterSymbolValue
Maximum Recurrent Peak Reverse VoltageVRRM600V
Maximum RMS VoltageVRMS420V
Maximum DC blocking VoltageVDC600V
Maximum Average Forward Rectified Current 3/8”lead length at Ta =55°CIf(av)0.8A
Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated loadIFSM35A
Inrush Current with 10Ω and 20uF foil capacitor placed in series to the DUT 10000 times, 10s between each pulse Tc=120℃Ifsm-140min
Inrush Current with 10Ω and 20uF foil capacitor placed in series to the DUT 1000 times, 10s between each pulse Tc=120℃Ifsm-250min
Maximum Forward Voltage at rated Forward Current and 25°CVf1V
Maximum DC Reverse Current at V =325V and Tc =25℃ DCIr1μA
Maximum DC Reverse Current Ta =25℃ at rated DC blocking voltage Ta =125℃Ir5μA
Maximum DC Reverse Current Tc =25℃ at rated DC blocking voltage Tc =120℃Ir100μA
Total power dissipatioPTOT1.28W
Typical Thermal ResistanceRth(ja)70°C/W
Maximum thermal resistance per legRth(jc)45°C/W
Typical Thermal ResistanceRth(jl)20°C/W
Typical Junction CapacitanceCj15pF
Storage and Operating Junction TemperatureTSTG, Tj-55to+150
Maximum DC Reverse Current Ta =25℃ at rated DC blocking voltage Ta =125℃Ir-

Features

  • Low profile space
  • Ideal for automated placement
  • Glass passivated chip
  • Low forward voltage drop
  • Low leakage current
  • High forward surge capability
  • High temperature soldering: 260℃/10 seconds
  • Halogen Free

Mechanical Data

Terminal
Plated leads solderable per J-STD-002
Case
Molded with UL-94 Class V-0 Halogen Free Epoxy
Polarity
Polarity symbol marked on body

Notes

  • [1]Tc=25℃(according to calculations)
  • [2]On aluminum substrate P.C.B. with an area of 0.8”×0.8”(20×20mm) mounted on 0.05×0.05”(1.3×1.3mm) solder pad
  • [3]Measured at 1.0 MHz and applied voltage of 4.0 volt