MDF04
Image shown is a representation only. Exact specifications should be obtained from the product data sheet.
- Category
- Bridge Rectifier
- Datasheet
- MDF0×
Product Spectation
| Parameter | Symbol | Value |
|---|---|---|
| Maximum Recurrent Peak Reverse Voltage | VRRM | 400V |
| Maximum RMS Voltage | VRMS | 280V |
| Maximum DC blocking Voltage | VDC | 400V |
| Maximum average forward Tc = 100℃ Rectified output current at Ta = 25℃ | If(av) | 0.5(1) |
| Maximum average forward Tc = 100℃ Rectified output current at Ta = 25℃ | If(av) | 0.8(2) |
| Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load | IFSM | 30A |
| Maximum Forward Voltage at rated Forward Current and 25°C | Vf | 1V |
| Rating for fusing (t < 8.3ms) | I2t | 5A²·s |
| Maximum DC Reverse Current Ta =25℃ at rated DC blocking voltage Ta =125℃ | Ir | 5μA |
| Maximum DC Reverse Current Ta =25℃ at rated DC blocking voltage Ta =125℃ | Ir | 500μA |
| Typical thermal resistance per leg (note) | RJA | 85(1) |
| Typical thermal resistance per leg (note) | RJA | 70(2) |
| Typical thermal resistance junction-to-lead | RJL | 20(1) |
| Typical Junction Capacitance | Cj | 13pF |
| Operating Temperature Range | Tj | -55to+125 |
| Storage and Operation Junction Temperature | TSTG | -55to+150 |
| Operating junction and storage temperature range | Tj, TSTG | - |
| Typical Thermal Resistance | Rth(ja) | - |
| Maximum DC reverse current at Ta = 25°C rated DC blocking voltage per leg Ta = 125°C [Ta=25°C] | Ir | - |
| Maximum thermal resistance per leg | Rth(jc) | - |
| Maximum DC reverse current at Ta = 25°C rated DC blocking voltage per leg Ta = 125°C [Ta=125°C] | Ir | - |
| Maximum Average Forward Rectified Current 3/8”lead length at Ta =55°C | If(av) | - |
Features
- For surface mount application
- Reliable low cost construction utilizing molded plastic
- Technique
- Surge overload rating: 30A peak
Mechanical Data
- Terminal
- Plated leads solderable per J-STD-002
- Case
- UL-94 Class V-0 recognized Flame Retardant Epoxy
- Polarity
- Polarity symbol marked on body
- Mounting Position
- any
Notes
- [1]On glass epoxy P.C.B. mounted on 0.05 x 0.05" (1.3 x 1.3mm) pads
- [2]On aluminum substrate P.C.B. with an area of 0.8" x 0.8" (20 x 20mm) mounted on 0.05 x 0.05" (1.3 x 1.3mm) solder pad
- [3]Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts