RLD06
Image shown is a representation only. Exact specifications should be obtained from the product data sheet.
- Category
- SMD Bridge Rectifier
- Datasheet
- RLD0×
Product Spectation
| Parameter | Symbol | Value |
|---|---|---|
| Maximum Recurrent Peak Reverse Voltage | VRRM | 600V |
| Maximum RMS Voltage | VRMS | 420V |
| Maximum DC blocking Voltage | VDC | 600V |
| Maximum Average Forward Rectified Current 3/8”lead length at Ta =55°C | If(av) | 0.6A |
| Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load | IFSM | 20A |
| Maximum Forward Voltage at rated Forward Current and 25°C | Vf | 1.3V |
| Maximum DC Reverse Current Ta =25℃ at rated DC blocking voltage Ta =125℃ | Ir | 5μA |
| Maximum DC Reverse Current Ta =25℃ at rated DC blocking voltage Ta =125℃ | Ir | 100μA |
| Maximum Reverse Recovery Time | TRR | 150ns |
| Typical Thermal Resistance | Rth(ja) | 70°C/W |
| Typical Thermal Resistance | Rth(jl) | 20°C/W |
| Typical Junction Capacitance | Cj | 13pF |
| Storage and Operating Junction Temperature | TSTG, Tj | -55to+150 |
Features
- Low profile space
- Ideal for automated placement
- Glass passivated chip
- Fast recovery time for high efficiency
- Low forward voltage drop
- Low leakage current
- High forward surge capability
- High temperature soldering: 260℃/10 seconds
Mechanical Data
- Terminal
- Plated leads solderable per J-STD-002
- Case
- UL-94 Class V-0 recognized Flame Retardant Epoxy
- Polarity
- Polarity symbol marked on body
Notes
- [1]Reverse Recovery Condition I = 0.5A, I = 1.0A, I = 0.25A F R RR
- [2]On aluminum substrate P.C.B. with an area of 0.8”×0.8”(20×20mm) mounted on 0.05×0.05”(1.3×1.3mm) solder pad
- [3]Measured at 1.0 MHz and applied voltage of 4.0 volt