Logo

SBYV26CGP

Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

Category
Fast Recovery Rectifier
Datasheet
SBYV26CGP
Start Inquiry with SBYV26CGP

Product Spectation

ParameterSymbolValue
Maximum Recurrent Peak Reverse VoltageVRRM600V
Maximum RMS VoltageVRMS420V
Maximum DC blocking VoltageVDC600V
Reverse avalanche breakdown voltage at IR = 0.1 mAV(BR)R(min)700V
Maximum Average Forward Rectified Current 3/8”lead length at Ta =55°CIf(av)1A
Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated loadIFSM30A
Maximum Forward Voltage at rated Forward Current and 25°CVf2.5V
Non-repetitive peak reverse avalanche energyERSM10
Maximum DC reverse current at Ta = 25°C rated DC blocking voltage per leg Ta = 125°C [Ta=25°C]Ir5μA
Maximum DC Reverse Current Ta =25°C at rated DC blocking voltage Ta =150°C [Ta=150°C]Ir150μA
Maximum Reverse Recovery TimeTRR30ns
Typical Junction CapacitanceCj15pF
Typical Thermal ResistanceR(jl)28°C/W
Storage and Operating Junction TemperatureTSTG, Tj-65to+175

Features

  • High temperature metallurgically bonded construction
  • Sintered glass cavity free junction
  • Capability of meeting environmental standard of
  • High temperature soldering guaranteed
  • 350°C /10sec/0.375”lead length at 5 lbs tension
  • Operate at Ta =55°C with no thermal run away
  • Typical Ir<0.1µA

Mechanical Data

Terminal
Plated axial leads solderable per MIL-STD 202E, method 208C
Case
Molded with UL-94 Class V-0 recognized Flame Retardant Epoxy
Polarity
color band denotes cathode
Mounting Position
any
Mark
V26C

Notes

  • [1]R=400mA; Tj=Tjmax prior to surge; inductive load switched off 2.Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A 3.Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc
  • [4]Thermal Resistance from Junction to Ambient and from junction to lead, P.C.B. Mounted on 0.2×0.2″(5.0×5.0mm) copper pad areas