SS1D
Image shown is a representation only. Exact specifications should be obtained from the product data sheet.
- Category
- General-Purpose Rectifier
- Datasheet
- SS1A-1M
Product Spectation
| Parameter | Symbol | Value |
|---|---|---|
| Maximum Recurrent Peak Reverse Voltage | VRRM | 200V |
| Maximum RMS Voltage | VRMS | 140V |
| Maximum DC blocking Voltage | VDC | 200V |
| Maximum Average Forward Rectified Current 3/8”lead length at Ta =55°C | If(av) | 1A |
| Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load | IFSM | 30A |
| Maximum Forward Voltage at rated Forward Current and 25°C | Vf | 1.1V |
| Maximum full load reverse current full cycle average at 55°C Ambient | Ir(av) | 30μA |
| Maximum DC Reverse Current Ta =25℃ at rated DC blocking voltage Ta =125℃ | Ir | 5μA |
| Maximum DC Reverse Current Ta =25℃ at rated DC blocking voltage Ta =125℃ | Ir | 50μA |
| Typical Junction Capacitance | Cj | 15pF |
| Typical Thermal Resistance | R(ja) | 80°C/W |
| Operating and Storage Temperature Range | TST, Tj | -65to+175 |
| Maximum DC reverse current at Ta = 25°C rated DC blocking voltage per leg Ta = 125°C [Ta=25°C] | Ir | - |
| Storage and Operating Junction Temperature | TSTG, Tj | - |
Features
- For surface mounted application
- High temperature metallurgic ally bonded
- Sintered glass junction
- Capability of meeting environmental standard of
- High temperature soldering guaranteed
- 450℃/10sec/at terminal／complete device
- Submersible temperature of 265℃ for 10sec
Mechanical Data
- Terminal
- Plated Terminal, solderable per MIL-STD 202, method 208C
- Case
- Molded with UL-94 class V-0 recognized Flame Retardant Epoxy over Glass
- Polarity
- color band denotes cathode end
Notes
- [1]Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc
- [2]Thermal Resistance from Junction to Ambient 6.0mm2 copper pad to each terminal