Logo

SU1J

Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

Category
General-Purpose Rectifier
Datasheet
SU1A-1M
Start Inquiry with SU1J

Product Spectation

ParameterSymbolValue
Maximum Recurrent Peak Reverse VoltageVRRM600V
Maximum RMS VoltageVRMS420V
Maximum DC blocking VoltageVDC600V
Maximum Average Forward Rectified Current 3/8”lead length at Ta =55°CIf(av)1A
Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated loadIFSM30A
Maximum Forward Voltage at rated Forward Current and 25°CVf1V
Maximum full load reverse current full cycle average at 55°C AmbientIr(av)50μA
Maximum DC Reverse Current Ta =25℃ at rated DC blocking voltage Ta =125℃Ir10μA
Maximum DC Reverse Current Ta =25℃ at rated DC blocking voltage Ta =125℃Ir50μA
Maximum Reverse Recovery TimeTRR50ns
Typical Junction CapacitanceCj8.5pF
Typical Thermal ResistanceR(-)JAR(-)JL85°C/W
Typical Thermal ResistanceR(-)JAR(-)JL28°C/W
Storage and Operating Junction TemperatureTSTG, Tj-65to+175
Maximum DC reverse current at Ta = 25°C rated DC blocking voltage per leg Ta = 125°C [Ta=25°C]Ir-
Typical Thermal ResistanceR(ja)-

Features

  • Ideal for surface mount automotive applications
  • High temperature metallurgically bonded construction
  • Capability of meeting environmental standard of
  • Fast switching for high efficiency
  • High temperature soldering guaranteed
  • 450℃/5sec at terminal
  • Complete device submersible temperature of
  • 265℃ for 10 seconds in solder bath

Mechanical Data

Terminal
Solder plated, solderable per MIL-STD 202, method 208C
Case
Molded with UL-94 class V-0 recognized Flame Retardant Epoxy over Glass
Polarity
color band denotes cathode end
Mounting Position
any

Notes

  • [1]Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A
  • [2]Measured at 1.0 MHz and applied Vr=4.0V
  • [3]Thermal Resistance from Junction to Ambient and from junction to lead, P.C.B. Mounted on 0.2×0.2″(5.0×5.0mm) copper pad areas1 1 Rev.A5, 10-Jan-05 www.gulfsemi.com